1.  This is a pre-release version of the X server from The X.Org Foundation.
  2.  It is not supported in any way.
  3.  Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
  4.  Select the "xorg" product for bugs you find in this release.
  5.  Before reporting bugs in pre-release versions please check the
  6.  latest version in the X.Org Foundation git repository.
  7.  See http://wiki.x.org/wiki/GitPage for git access instructions.
  8.  
  9.  X.Org X Server 1.7.6.901 (1.7.7 RC 1)
  10.  Release Date: 2010-04-12
  11.  X Protocol Version 11, Revision 0
  12.  Build Operating System: Linux 2.6.32-4-amd64 x86_64 Debian
  13.  Current Operating System: Linux zappa 2.6.32-3-amd64 #1 SMP Wed Feb 24 18:07:42 UTC 2010 x86_64
  14.  Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-amd64 root=UUID=6f2415a1-fa83-4d9e-aaf8-8de51e71b113 ro quiet
  15.  Build Date: 19 April 2010  04:58:05PM
  16.  xorg-server 2:1.7.6.901-3 (Cyril Brulebois <kibi@debian.org>) 
  17.  Current version of pixman: 0.16.4
  18.  	Before reporting problems, check http://wiki.x.org
  19.  	to make sure that you have the latest version.
  20.  Markers: (--) probed, (**) from config file, (==) default setting,
  21.  	(++) from command line, (!!) notice, (II) informational,
  22.  	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
  23.  (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 10 18:37:01 2010
  24.  (==) Using config file: "/etc/X11/xorg.conf"
  25.  (==) Using system config directory "/usr/share/X11/xorg.conf.d"
  26.  (==) ServerLayout "aticonfig Layout"
  27.  (**) |-->Screen "aticonfig-Screen[0]-0" (0)
  28.  (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
  29.  (**) |   |-->Device "aticonfig-Device[0]-0"
  30.  (==) Automatically adding devices
  31.  (==) Automatically enabling devices
  32.  (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
  33.  	Entry deleted from font path.
  34.  (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
  35.  	Entry deleted from font path.
  36.  (==) FontPath set to:
  37.  	/usr/share/fonts/X11/misc,
  38.  	/usr/share/fonts/X11/100dpi/:unscaled,
  39.  	/usr/share/fonts/X11/75dpi/:unscaled,
  40.  	/usr/share/fonts/X11/Type1,
  41.  	/usr/share/fonts/X11/100dpi,
  42.  	/usr/share/fonts/X11/75dpi,
  43.  	built-ins
  44.  (==) ModulePath set to "/usr/lib/xorg/modules"
  45.  (II) The server relies on udev to provide the list of input devices.
  46.  	If no devices become available, reconfigure udev or disable AutoAddDevices.
  47.  (II) Loader magic: 0x7c5dc0
  48.  (II) Module ABI versions:
  49.  	X.Org ANSI C Emulation: 0.4
  50.  	X.Org Video Driver: 6.0
  51.  	X.Org XInput driver : 7.0
  52.  	X.Org Server Extension : 2.0
  53.  (--) using VT number 7
  54.  
  55.  (--) PCI:*(0:1:0:0) 1002:689e:1787:2296 ATI Technologies Inc rev 0, Mem @ 0xd0000000/268435456, 0xefec0000/131072, I/O @ 0x0000dc00/256, BIOS @ 0x????????/131072
  56.  (II) Open ACPI successful (/var/run/acpid.socket)
  57.  (II) "extmod" will be loaded by default.
  58.  (II) "dbe" will be loaded by default.
  59.  (II) "glx" will be loaded by default.
  60.  (II) "record" will be loaded by default.
  61.  (II) "dri" will be loaded by default.
  62.  (II) "dri2" will be loaded by default.
  63.  (II) LoadModule: "extmod"
  64.  (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
  65.  (II) Module extmod: vendor="X.Org Foundation"
  66.  	compiled for 1.7.6.901, module version = 1.0.0
  67.  	Module class: X.Org Server Extension
  68.  	ABI class: X.Org Server Extension, version 2.0
  69.  (II) Loading extension SELinux
  70.  (II) Loading extension MIT-SCREEN-SAVER
  71.  (II) Loading extension XFree86-VidModeExtension
  72.  (II) Loading extension XFree86-DGA
  73.  (II) Loading extension DPMS
  74.  (II) Loading extension XVideo
  75.  (II) Loading extension XVideo-MotionCompensation
  76.  (II) Loading extension X-Resource
  77.  (II) LoadModule: "dbe"
  78.  (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
  79.  (II) Module dbe: vendor="X.Org Foundation"
  80.  	compiled for 1.7.6.901, module version = 1.0.0
  81.  	Module class: X.Org Server Extension
  82.  	ABI class: X.Org Server Extension, version 2.0
  83.  (II) Loading extension DOUBLE-BUFFER
  84.  (II) LoadModule: "glx"
  85.  (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
  86.  (II) Module glx: vendor="FireGL - ATI Technologies Inc."
  87.  	compiled for 7.5.0, module version = 1.0.0
  88.  (II) Loading extension GLX
  89.  (II) LoadModule: "record"
  90.  (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
  91.  (II) Module record: vendor="X.Org Foundation"
  92.  	compiled for 1.7.6.901, module version = 1.13.0
  93.  	Module class: X.Org Server Extension
  94.  	ABI class: X.Org Server Extension, version 2.0
  95.  (II) Loading extension RECORD
  96.  (II) LoadModule: "dri"
  97.  (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
  98.  (II) Module dri: vendor="X.Org Foundation"
  99.  	compiled for 1.7.6.901, module version = 1.0.0
  100.  	ABI class: X.Org Server Extension, version 2.0
  101.  (II) Loading extension XFree86-DRI
  102.  (II) LoadModule: "dri2"
  103.  (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
  104.  (II) Module dri2: vendor="X.Org Foundation"
  105.  	compiled for 1.7.6.901, module version = 1.1.0
  106.  	ABI class: X.Org Server Extension, version 2.0
  107.  (II) Loading extension DRI2
  108.  (II) LoadModule: "fglrx"
  109.  (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
  110.  (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
  111.  	compiled for 1.7.1, module version = 8.74.4
  112.  	Module class: X.Org Video Driver
  113.  (II) Loading sub module "fglrxdrm"
  114.  (II) LoadModule: "fglrxdrm"
  115.  (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
  116.  (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
  117.  	compiled for 1.7.1, module version = 8.74.4
  118.  (II) ATI Proprietary Linux Driver Version Identifier:8.74.4
  119.  (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.74                     
  120.  (II) ATI Proprietary Linux Driver Build Date: May  4 2010 21:27:42
  121.  (II) Primary Device is: PCI 01@00:00:0
  122.  (WW) Falling back to old probe method for fglrx
  123.  (II) Loading PCS database from /etc/ati/amdpcsdb
  124.  (--) Chipset Supported AMD Graphics Processor (0x689E) found
  125.  (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
  126.  (II) AMD Video driver is running on a device generally supported by this driver
  127.  (II) AMD Video driver is unsigned
  128.  (II) fglrx(0): pEnt->device->identifier=0x1c3e770
  129.  (II) fglrx(0): === [atiddxPreInit] === begin
  130.  (II) Loading sub module "vgahw"
  131.  (II) LoadModule: "vgahw"
  132.  (II) Loading /usr/lib/xorg/modules/libvgahw.so
  133.  (II) Module vgahw: vendor="X.Org Foundation"
  134.  	compiled for 1.7.6.901, module version = 0.1.0
  135.  	ABI class: X.Org Video Driver, version 6.0
  136.  (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
  137.  (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
  138.  (==) fglrx(0): Default visual is TrueColor
  139.  (**) fglrx(0): Option "DPMS" "true"
  140.  (==) fglrx(0): RGB weight 888
  141.  (II) fglrx(0): Using 8 bits per RGB 
  142.  (==) fglrx(0): Buffer Tiling is ON
  143.  (II) Loading sub module "fglrxdrm"
  144.  (II) LoadModule: "fglrxdrm"
  145.  (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
  146.  ukiDynamicMajor: found major device number 250
  147.  ukiDynamicMajor: found major device number 250
  148.  ukiOpenByBusid: Searching for BusID PCI:1:0:0
  149.  ukiOpenDevice: node name is /dev/ati/card0
  150.  ukiOpenDevice: open result is 11, (OK)
  151.  ukiOpenByBusid: ukiOpenMinor returns 11
  152.  ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
  153.  (==) fglrx(0): NoAccel = NO
  154.  (==) fglrx(0): ATI 2D Acceleration Architecture enabled
  155.  (--) fglrx(0): Chipset: "ATI Radeon HD 5800 Series" (Chipset = 0x689e)
  156.  (--) fglrx(0): (PciSubVendor = 0x1787, PciSubDevice = 0x2296)
  157.  (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
  158.  (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
  159.  (--) fglrx(0): MMIO registers at 0xefec0000
  160.  (--) fglrx(0): I/O port at 0x0000dc00
  161.  (==) fglrx(0): ROM-BIOS at 0x000c0000
  162.  (II) fglrx(0): AC Adapter is used
  163.  (II) fglrx(0): Primary V_BIOS segment is: 0xc000
  164.  (II) Loading sub module "vbe"
  165.  (II) LoadModule: "vbe"
  166.  (II) Loading /usr/lib/xorg/modules/libvbe.so
  167.  (II) Module vbe: vendor="X.Org Foundation"
  168.  	compiled for 1.7.6.901, module version = 1.1.0
  169.  	ABI class: X.Org Video Driver, version 6.0
  170.  (II) fglrx(0): VESA BIOS detected
  171.  (II) fglrx(0): VESA VBE Version 3.0
  172.  (II) fglrx(0): VESA VBE Total Mem: 16384 kB
  173.  (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
  174.  (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
  175.  (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
  176.  (II) fglrx(0): VESA VBE OEM Product: CYPRESS
  177.  (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
  178.  (II) fglrx(0): ATI Video BIOS revision 9 or later detected
  179.  (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
  180.  (II) fglrx(0): PCIE card detected
  181.  (--) fglrx(0): Using per-process page tables (PPPT) as GART.
  182.  (WW) fglrx(0): board is an unknown third party board, chipset is supported
  183.  (II) fglrx(0): Using adapter: 1:0.0.
  184.  (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
  185.  (II) fglrx(0): Interrupt handler installed at IRQ 27.
  186.  (II) fglrx(0): RandR 1.2 support is enabled!
  187.  (II) fglrx(0): RandR 1.2 rotation support is enabled!
  188.  (==) fglrx(0): Center Mode is disabled 
  189.  (II) Loading sub module "fb"
  190.  (II) LoadModule: "fb"
  191.  (II) Loading /usr/lib/xorg/modules/libfb.so
  192.  (II) Module fb: vendor="X.Org Foundation"
  193.  	compiled for 1.7.6.901, module version = 1.0.0
  194.  	ABI class: X.Org ANSI C Emulation, version 0.4
  195.  (II) Loading sub module "ddc"
  196.  (II) LoadModule: "ddc"
  197.  (II) Module "ddc" already built-in
  198.  (II) fglrx(0): Finished Initialize PPLIB!
  199.  (II) Loading sub module "ddc"
  200.  (II) LoadModule: "ddc"
  201.  (II) Module "ddc" already built-in
  202.  (II) fglrx(0): Connected Display0: CRT on primary DAC [crt1]
  203.  (II) fglrx(0): Display0 EDID data ---------------------------
  204.  (II) fglrx(0): Manufacturer: HIT  Model: 60ff  Serial#: 16843009
  205.  (II) fglrx(0): Year: 2008  Week: 13
  206.  (II) fglrx(0): EDID Version: 1.3
  207.  (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
  208.  (II) fglrx(0): Sync:  Separate
  209.  (II) fglrx(0): Max Image Size [cm]: horiz.: 47  vert.: 30
  210.  (II) fglrx(0): Gamma: 2.20
  211.  (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
  212.  (II) fglrx(0): First detailed timing is preferred mode
  213.  (II) fglrx(0): redX: 0.644 redY: 0.333   greenX: 0.286 greenY: 0.603
  214.  (II) fglrx(0): blueX: 0.152 blueY: 0.079   whiteX: 0.313 whiteY: 0.329
  215.  (II) fglrx(0): Supported established timings:
  216.  (II) fglrx(0): 720x400@70Hz
  217.  (II) fglrx(0): 640x480@60Hz
  218.  (II) fglrx(0): 640x480@72Hz
  219.  (II) fglrx(0): 640x480@75Hz
  220.  (II) fglrx(0): 800x600@60Hz
  221.  (II) fglrx(0): 800x600@72Hz
  222.  (II) fglrx(0): 800x600@75Hz
  223.  (II) fglrx(0): 1024x768@60Hz
  224.  (II) fglrx(0): 1024x768@70Hz
  225.  (II) fglrx(0): 1024x768@75Hz
  226.  (II) fglrx(0): 1280x1024@75Hz
  227.  (II) fglrx(0): Manufacturer's mask: 0
  228.  (II) fglrx(0): Supported standard timings:
  229.  (II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
  230.  (II) fglrx(0): #1: hsize: 1680  vsize 1050  refresh: 60  vid: 179
  231.  (II) fglrx(0): #2: hsize: 1440  vsize 900  refresh: 60  vid: 149
  232.  (II) fglrx(0): #3: hsize: 1440  vsize 900  refresh: 75  vid: 3989
  233.  (II) fglrx(0): Supported detailed timing:
  234.  (II) fglrx(0): clock: 146.2 MHz   Image Size:  474 x 296 mm
  235.  (II) fglrx(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
  236.  (II) fglrx(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1089 v_border: 0
  237.  (II) fglrx(0): Monitor name: N220W D-sub
  238.  (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 150 MHz
  239.  (II) fglrx(0): Serial No: 0WAP0B8305209
  240.  (II) fglrx(0): EDID (in hex):
  241.  (II) fglrx(0): 	00ffffffffffff002134ff6001010101
  242.  (II) fglrx(0): 	0d120103082f1e78ead515a455499a27
  243.  (II) fglrx(0): 	145054adcf008180b3009500950f0101
  244.  (II) fglrx(0): 	01010101010121399030621a274068b0
  245.  (II) fglrx(0): 	3600da281100001c000000fc004e3232
  246.  (II) fglrx(0): 	305720442d7375620a20000000fd0038
  247.  (II) fglrx(0): 	4c1f500f000a202020202020000000ff
  248.  (II) fglrx(0): 	003057415030423833303532303900ed
  249.  (II) fglrx(0): End of Display0 EDID data --------------------
  250.  (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
  251.  (II) fglrx(0): Output DFP2 has no monitor section
  252.  (II) fglrx(0): Output DFP3 has no monitor section
  253.  (II) fglrx(0): Output DFP4 has no monitor section
  254.  (II) fglrx(0): Output CRT1 has no monitor section
  255.  (II) fglrx(0): Output CRT2 has no monitor section
  256.  (II) fglrx(0): Output DFP1 disconnected
  257.  (II) fglrx(0): Output DFP2 disconnected
  258.  (II) fglrx(0): Output DFP3 disconnected
  259.  (II) fglrx(0): Output DFP4 disconnected
  260.  (II) fglrx(0): Output CRT1 connected
  261.  (II) fglrx(0): Output CRT2 disconnected
  262.  (II) fglrx(0): Using exact sizes for initial modes
  263.  (II) fglrx(0): Output CRT1 using initial mode 1680x1050
  264.  (II) fglrx(0): DPI set to (96, 96)
  265.  (II) fglrx(0): Eyefinity capable adapter detected.
  266.  (II) fglrx(0): Adapter ATI Radeon HD 5800 Series has 3 configurable heads and 1 displays connected.
  267.  (==) fglrx(0): QBS disabled
  268.  (==) fglrx(0):  PseudoColor visuals disabled
  269.  (II) Loading sub module "ramdac"
  270.  (II) LoadModule: "ramdac"
  271.  (II) Module "ramdac" already built-in
  272.  (==) fglrx(0): NoDRI = NO
  273.  (==) fglrx(0): Capabilities: 0x00000000
  274.  (==) fglrx(0): CapabilitiesEx: 0x00000000
  275.  (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
  276.  (==) fglrx(0): UseFastTLS=0
  277.  (==) fglrx(0): BlockSignalsOnLock=1
  278.  (--) Depth 24 pixmap format is 32 bpp
  279.  (II) Loading extension ATIFGLRXDRI
  280.  (II) fglrx(0): doing swlDriScreenInit
  281.  (II) fglrx(0): swlDriScreenInit for fglrx driver
  282.  ukiDynamicMajor: found major device number 250
  283.  ukiDynamicMajor: found major device number 250
  284.  ukiDynamicMajor: found major device number 250
  285.  ukiOpenByBusid: Searching for BusID PCI:1:0:0
  286.  ukiOpenDevice: node name is /dev/ati/card0
  287.  ukiOpenDevice: open result is 16, (OK)
  288.  ukiOpenByBusid: ukiOpenMinor returns 16
  289.  ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
  290.  (II) fglrx(0): [uki] DRM interface version 1.0
  291.  (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
  292.  (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
  293.  (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f9844d27000
  294.  (II) fglrx(0): [uki] framebuffer handle = 0x3000
  295.  (II) fglrx(0): [uki] added 1 reserved context for kernel
  296.  (II) fglrx(0): swlDriScreenInit done
  297.  (II) fglrx(0): Kernel Module Version Information:
  298.  (II) fglrx(0):     Name: fglrx
  299.  (II) fglrx(0):     Version: 8.74.4
  300.  (II) fglrx(0):     Date: May  4 2010
  301.  (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
  302.  (II) fglrx(0): Kernel Module version matches driver.
  303.  (II) fglrx(0): Kernel Module Build Time Information:
  304.  (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.32-3-amd64
  305.  (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
  306.  (II) fglrx(0):     Build-Kernel __SMP__:            yes
  307.  (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
  308.  (II) fglrx(0): [uki] register handle = 0x00004000
  309.  (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints
  310.  (II) fglrx(0): DRI initialization successfull!
  311.  (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a0000
  312.  (II) fglrx(0): FBMM initialized for area (0,0)-(1792,2432)
  313.  (II) fglrx(0): FBMM auto alloc for area (0,0)-(1792,1792) (front color buffer - assumption)
  314.  (II) fglrx(0): Largest offscreen area available: 1792 x 640
  315.  (==) fglrx(0): Backing store disabled
  316.  (II) Loading extension FGLRXEXTENSION
  317.  (**) fglrx(0): DPMS enabled
  318.  (II) fglrx(0): Initialized in-driver Xinerama extension
  319.  (**) fglrx(0): Textured Video is enabled.
  320.  (II) LoadModule: "glesx"
  321.  (II) Loading /usr/lib/xorg/modules/glesx.so
  322.  (II) Module glesx: vendor="X.Org Foundation"
  323.  	compiled for 1.7.1, module version = 1.0.0
  324.  (II) Loading extension GLESX
  325.  (II) fglrx(0): GLESX enableFlags = 592
  326.  (II) fglrx(0): GLESX is enabled
  327.  (II) fglrx(0): Acceleration enabled
  328.  (II) LoadModule: "amdxmm"
  329.  (II) Loading /usr/lib/xorg/modules/amdxmm.so
  330.  (II) Module amdxmm: vendor="X.Org Foundation"
  331.  	compiled for 1.7.1, module version = 1.0.0
  332.  (II) Loading extension AMDXVOPL
  333.  (II) fglrx(0): UVD2 feature is available
  334.  (II) fglrx(0): Enable composite support successfully
  335.  (WW) fglrx(0): Option "VendorName" is not used
  336.  (WW) fglrx(0): Option "ModelName" is not used
  337.  (II) fglrx(0): X context handle = 0x1
  338.  (II) fglrx(0): [DRI] installation complete
  339.  (==) fglrx(0): Silken mouse enabled
  340.  (==) fglrx(0): Using HW cursor of display infrastructure!
  341.  (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
  342.  (--) RandR disabled
  343.  (II) Initializing built-in extension Generic Event Extension
  344.  (II) Initializing built-in extension SHAPE
  345.  (II) Initializing built-in extension MIT-SHM
  346.  (II) Initializing built-in extension XInputExtension
  347.  (II) Initializing built-in extension XTEST
  348.  (II) Initializing built-in extension BIG-REQUESTS
  349.  (II) Initializing built-in extension SYNC
  350.  (II) Initializing built-in extension XKEYBOARD
  351.  (II) Initializing built-in extension XC-MISC
  352.  (II) Initializing built-in extension XINERAMA
  353.  (II) Initializing built-in extension XFIXES
  354.  (II) Initializing built-in extension RENDER
  355.  (II) Initializing built-in extension RANDR
  356.  (II) Initializing built-in extension COMPOSITE
  357.  (II) Initializing built-in extension DAMAGE
  358.  SELinux: Disabled on system, not enabling in X server
  359.  ukiDynamicMajor: found major device number 250
  360.  ukiDynamicMajor: found major device number 250
  361.  ukiOpenByBusid: Searching for BusID PCI:1:0:0
  362.  ukiOpenDevice: node name is /dev/ati/card0
  363.  ukiOpenDevice: open result is 17, (OK)
  364.  ukiOpenByBusid: ukiOpenMinor returns 17
  365.  ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
  366.  (II) AIGLX: Loaded and initialized /usr/X11R6/lib64/modules/dri/fglrx_dri.so
  367.  (II) GLX: Initialized DRI GL provider for screen 0
  368.  (II) fglrx(0): Enable the clock gating!
  369.  (II) fglrx(0): Setting screen physical size to 444 x 277
  370.  (II) config/udev: Adding input device Power Button (/dev/input/event2)
  371.  (**) Power Button: Applying InputClass "evdev keyboard catchall"
  372.  (II) LoadModule: "evdev"
  373.  (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
  374.  (II) Module evdev: vendor="X.Org Foundation"
  375.  	compiled for 1.7.6.901, module version = 2.3.2
  376.  	Module class: X.Org XInput Driver
  377.  	ABI class: X.Org XInput driver, version 7.0
  378.  (**) Power Button: always reports core events
  379.  (**) Power Button: Device: "/dev/input/event2"
  380.  (II) Power Button: Found keys
  381.  (II) Power Button: Configuring as keyboard
  382.  (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
  383.  (**) Option "xkb_rules" "evdev"
  384.  (**) Option "xkb_model" "pc105"
  385.  (**) Option "xkb_layout" "gb"
  386.  (II) config/udev: Adding input device Power Button (/dev/input/event1)
  387.  (**) Power Button: Applying InputClass "evdev keyboard catchall"
  388.  (**) Power Button: always reports core events
  389.  (**) Power Button: Device: "/dev/input/event1"
  390.  (II) Power Button: Found keys
  391.  (II) Power Button: Configuring as keyboard
  392.  (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
  393.  (**) Option "xkb_rules" "evdev"
  394.  (**) Option "xkb_model" "pc105"
  395.  (**) Option "xkb_layout" "gb"
  396.  (II) config/udev: Adding input device NOVATEK USB Keyboard (/dev/input/event3)
  397.  (**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard catchall"
  398.  (**) NOVATEK USB Keyboard: always reports core events
  399.  (**) NOVATEK USB Keyboard: Device: "/dev/input/event3"
  400.  (II) NOVATEK USB Keyboard: Found keys
  401.  (II) NOVATEK USB Keyboard: Configuring as keyboard
  402.  (II) XINPUT: Adding extended input device "NOVATEK USB Keyboard" (type: KEYBOARD)
  403.  (**) Option "xkb_rules" "evdev"
  404.  (**) Option "xkb_model" "pc105"
  405.  (**) Option "xkb_layout" "gb"
  406.  (II) config/udev: Adding input device NOVATEK USB Keyboard (/dev/input/event4)
  407.  (**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard catchall"
  408.  (**) NOVATEK USB Keyboard: always reports core events
  409.  (**) NOVATEK USB Keyboard: Device: "/dev/input/event4"
  410.  (II) NOVATEK USB Keyboard: Found 14 mouse buttons
  411.  (II) NOVATEK USB Keyboard: Found keys
  412.  (II) NOVATEK USB Keyboard: Configuring as mouse
  413.  (II) NOVATEK USB Keyboard: Configuring as keyboard
  414.  (**) NOVATEK USB Keyboard: YAxisMapping: buttons 4 and 5
  415.  (**) NOVATEK USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
  416.  (II) XINPUT: Adding extended input device "NOVATEK USB Keyboard" (type: KEYBOARD)
  417.  (**) Option "xkb_rules" "evdev"
  418.  (**) Option "xkb_model" "pc105"
  419.  (**) Option "xkb_layout" "gb"
  420.  (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event5)
  421.  (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
  422.  (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
  423.  (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event5"
  424.  (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
  425.  (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
  426.  (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
  427.  (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
  428.  (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
  429.  (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
  430.  (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
  431.  (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE)
  432.  (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
  433.  (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse1)
  434.  (II) No input driver/identifier specified (ignoring)
  435.  (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
  436.  (II) No input driver/identifier specified (ignoring)
  437.  (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
  438.  (**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
  439.  (**) Macintosh mouse button emulation: always reports core events
  440.  (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
  441.  (II) Macintosh mouse button emulation: Found 3 mouse buttons
  442.  (II) Macintosh mouse button emulation: Found relative axes
  443.  (II) Macintosh mouse button emulation: Found x and y relative axes
  444.  (II) Macintosh mouse button emulation: Configuring as mouse
  445.  (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
  446.  (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
  447.  (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
  448.  (II) Macintosh mouse button emulation: initialized for relative axes.
  449.  (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
  450.  (II) No input driver/identifier specified (ignoring)
  451.  (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments